Category 5 24 port shielded distribution frame

2022-06-02

Product name: Category 5 shielded 24 bit RJ45 distribution frame

Reference standards: TIA/EIA 568B, ISO/IEC 11801, YD/T 926.3;

Product Introduction: Meets and exceeds the Class 5 system standards specified above, supports T568A and T568B wire sequences, suitable for horizontal wiring or equipment termination between devices, as well as interconnection termination at centralized points. The design is solid and easy to install, reducing installation and operation costs. The large front labeling space facilitates port identification and management. Comprehensive shielding design, effectively preventing EMC interference, and including grounding wire design. Complies with 19 "rack installation standard, with a height of 1U.

Product features:

1. The distribution frame is made of steel frame sprayed with plastic, which is beautiful and elegant;

2.19-inch rack mounted equipment that meets and exceeds the relevant standards for Category 5 shielded distribution frames, with a standard height of 1U;

3. Suitable for horizontal wiring or equipment termination between devices, as well as interconnection termination at centralized points, with a sturdy and easy to install design, reducing installation and operation costs;

4. All port cable racks are labeled before and after, with a larger front labeling space for easy port identification and management;

5. Compatible with T568A and T568B wire sequences, suitable for 24AWG wire specifications;

6. Shielding and grounding design;

7. RJ45 port is designed as a shielded port;

8. The distribution frame is a metal structure as a whole, with a fully enclosed metal shielding layer outside the wiring terminals;

9. Each shielded cable is equipped with an all metal cable clamp at the termination point to ensure cable shielding and grounding performance;

10. The distribution frame includes an independent grounding wire design, ensuring the overall shielding and grounding performance of the distribution frame;

11. Quick connect design:

12. The wiring terminal of the distribution frame cable is 110 terminal, which can be used with a 110 card cutter;

13. The distribution frame terminals are designed as one piece, with stable performance and can be quickly wired without the need for any modules to be selected;

14. The back of the distribution frame is designed with shielded cable clamps, which fix the cables during wiring to ensure that the cable terminations are firm and aesthetically pleasing

Product specifications:

包装说明：单个配线架使用彩色纸盒包装，内包含安装附件（螺丝等）